Latest Services

Pluming Installation

Next remove the corner screws that are securing the top of the old vanity to the countertop. The countertop should then be able to be lifted off of the old vanity. After the countertop has been separated from the vanity, remove the faucet hardware if you plan on reusing the existing faucet. Make sure, however, when purchasing your new vanity countertop that it will support the faucet configuration. After the counter top and faucet have been removed from the work area, unscrew the back and/or side screws that hold the vanity to the wall(s). Then remove the vanity from the bathroom.

 

Hot water circulator

Hot water circulating systems generally provide convenience and save water. A hot water circulation pump gives you hot water where you need it, when you need it, without any waiting. It's something to benefit all homes.
Hot water recirculation systems generally consist of a pump, an integrated electronic controller, and a zone valve. When the activation button is pushed, or when another type of control turns the system on, the pump starts re-circulating cooled water that's been sitting in the hot water line and sends it back to the water heater through the cold water line. When the water reaches a desired temperature a control closes the zone valve and turns off the pump. It is much like turning on the hot water faucet and letting the water run until it gets hot, but instead of the water going down the drain; it is simply returned back to the water heater. When the hot water faucet is turned on, hot water is readily available.