Latest Services

Pluming Installation

Next remove the corner screws that are securing the top of the old vanity to the countertop. The countertop should then be able to be lifted off of the old vanity. After the countertop has been separated from the vanity, remove the faucet hardware if you plan on reusing the existing faucet. Make sure, however, when purchasing your new vanity countertop that it will support the faucet configuration. After the counter top and faucet have been removed from the work area, unscrew the back and/or side screws that hold the vanity to the wall(s). Then remove the vanity from the bathroom.


Water heater

This is for installing a new electric water heater. If you want gas do the plumbing only and get a licensed Cobble Hill Plumbing & Heating gas installer to locate it and hook up the gas.
First you need to locate the water cut off to the house. It may be out at the street with the water meter or there could be an in line one somewhere between the outside and the water heater. Cut the water on in a sink and have someone watch that it starts to slow when you think you have the right cut off. It will stop completely after the pipes have drained.
 You will have to cut the pipes and install "t" fittings so you can connect to the heater. There are a lot of rules for gas so you have to get a gas professional to locate it for you.